Making injection mold is a difficult process. Even small mistakes can cost you almost a fortune. Such work should be done with immense attention and prior experience. While making, injection molds one faces many problems like the machine, the mold, but most of the trouble arises due to the plastic. Many people today are opting for plastic and its demand is increasing, but we cannot overlook the difficulties of transparent plastic products in making injection molds. Use of plastic in making injection modules is difficult. There are several reasons behind this. First, the process through which the plastic goes through is a tough one. It passes to the heating cylinder from the hopper on the way into the cavity. After facing such dreadful situations, its shape and size are ought to change. Other reasons are that the valve spring may leak or the heater band might be burned.
The kind of plastic you choose for your mold could also create problems. If you choose wrong plastic it can affect your material adversely. In case you think that all plastics are the same, then you are wrong. They are not. It is important to learn first about your material, your work design about it, its peculiarities. Making all these decisions earlier can be of great help and will also save you the trouble of making changes later.
ABS – The ABS plastic which is generally used has the tendency to get scratch or scars that are clearly visible. During the cooling process, it also has problems sinking. And if you use an opaque plastic, then good luck with it.
Glass-filled nylon – Good thing about the glass – filled nylon is that it can resist many harsh solvents that that could damage other plastics like ABS and polycarbonate but its main con that causes problem is that Glass-filled nylon is extremely vulnerable to sinking. The material design is of no help.
Polycarbonate – Polycarbonate’s price is higher than that of ABS. It also has the tendency to sink. And if there is some kind of defect in your material then it can affect the plastic’s performance.
If you want more strength from the plastic, then you can combine the ABS & Polycarbonate for better results.
Next problem you face from the plastic is due to its color. The majority of the colors in which plastic is available only vary between dark brown or black. You don’t have many options to choose from. After its finishing, the outlook and appearance of the product depend on its final color. If you want, then you can have it spray painted, but that will increase your production cost.
Although the final cost of your product depends on all the investment the choice of plastic plays a major part. In general cases the price is low, but in extreme cases, it can revolve around the figure of $10000 to $12000.
If you too want injection mold then you should visit injection mould china factory. They are the best injection mold maker in China. Injection mold china will provide you the best quality molds. You can visit them on the URL given below.
For more information, please refer to https://www.injectionmouldchina.com